Swiid

Swiid Cord Switch - Svart

Artikelnummer: ZCS1-B
Utgått ur sortimentet

SwiidInter™ is the first - and at this time still the only - cord switch in the Z -Wave® ecosystem which is small enough to be compared to a regular cord switch. It can be used both manually like any ordinary cord switch and remotely by Z -Wave. 

SwiidInter can also handle associations with other devices, both ways to and from it. Thus, your SwiidInter™ can respond directly to a signal from another Z-Wave device in your network, such as the triggering of a presence detector. Conversely with a short press or a long press it can control two separate Z-Wave device groups that have been associated with it : for example, all the other lights in your bedroom where your SwiidInter™ is on the cord of your bedside lamp. 

Physically installing a SwiidInter™ is done in the same exact way as any ordinary cord switch: it is a quick and simple operation that requires no special tools. Once done, it will operate as an ordinary cord switch with a simple on/off push button. Only then can you configure your SwiidInter™ to include it into a Z-Wave® network and interoperate with other controllers and devices (even if you have only one other Z-Wave device).

Specifikationer:

  • Device Type : Binary power switch
  • Power input : 230V ± 10% - 50Hz
  • Max. power : 660W
  • EU Norms : EN 61058-2-1:2011 & EN 55015
  • Protection index : IP20
  • Size : 84 x 32 x 29 mm
  • Radio protocol : Z-Wave® (SDK 4.55)
  • Radio frequency : 868,42 MHz (EU)
  • Transmission dist.: Max. 30m indoors depending on construction materials
  • Working temp : 0 – 40°C
  • On/Off signal : Blue LEDs
  • Power consumption : < 0,08W

Skriv en recension

Kompatibilitetslistan uppdateras ganska ofta men fel kan förekomma. Hittar du något som är felaktigt så meddela oss gärna så att vi kan ändra!

Controller Status Kommentar
ZNet Lite V2 Enheten fungerar helt och hållet
Home Center HC3 Enheten fungerar helt och hållet i HC2 och HCL
Zipabox Enheten fungerar helt och hållet