Popp

Smoke Sensor with indoor siren function - Popp

Artikelnummer: POPE004001
Utgått ur sortimentet

The Z-Wave smoke detector from manufacturer POPP sets new safety standards in your home.

There are a lot of potential fire sources in your own four walls, for example open fire such as candles or a fireplace. Also an iron, cooking utensils or numerous other electrical device can cause fire. Smoke detectors can save lives. In case of a fire or smoke emission every second counts giving the chance to extinguish the fire or to get somebody or themselves out of harms way.

The Z-Wave smoke detector detects resulting fire and smoke emission reliable. In case of emergency it alarms acoustically and sends alarm signal to Z-Wave network so that all other smoke detectors in range can be alarmed. That ensures that the alert also reaches people in all floors as well as in the night while they are sleeping.

Thanks to Z-Wave wireless technology you can define further actions triggered by the smart home control center in case of an alarm. To enhance safety, escape routes can be highlighted with automated lighting and unlocking or locking of shutters and doors. Z-Wave smart home buys time for you to get somebody or yourself out of harms way Beyond these functions the Z-Wave smoke detector can be used as an independent indoor siren which can be integrated into an existing security system.

Within your Z-Wave smart home network the smoke detector can be connected to other sensors such as door and window contacts or motion sensors independently from a control center. In case of an alarm the acoustic signal will be different from the signal in case of fire.

If one smoke detector causes an alert it will relay to all other POPP smoke detectors within Z-Wave network automatically and without any configuration in the control center Bidirectional wireless protocol ensures high security and status messages Acoustic alarm Indoor siren function

Skriv en recension

Vad är Z-Wave Plus?

Z-Wave Plus™ är en certifiering som är utvecklad för att hjälpa användare att identifiera produkter som använder den "nya generationen" även känd som "500 serien" av Z-Wave hårdvara. Z-Wave Plus™ erbjuder en drös med olika extra funktioner och möjligheter som förbättrar ditt användande och gör att installationen av Z-Wave enheter blir enklare.

Z-Wave har varit ledande på marknaden inom driftskompatibla smarta enheter för hemmet sedan 2004. Med introduktionen av Next-Gen (Z-Wave 500 serien) hårdvaran så såg Z-Wave nya möjligheter, inkluderat med längre räckvidd, längre batteritid, Over The Air uppgradering (OTA), fler RF kanaler och mycket mer. Allt detta och dom är bakåtkompatibla med existerande Z-Wave enheter.

För konsumenter, husägare, integratörer och tjänsteleverantörer så blev denna uppgradering väldigt fördelsfull i termerna av mycket enklare installation, rikare enhetsprofiler, förbättrad självläkning och längre batteritid.

Egenskaper:

  • 50% Längre batteritid
  • 67% Längre räckvidd
  • 250% Mer bandbredd
  • 3 F kanaler för förbättrad störningsskydd och högre bandbredd
  • Ny Plug-n-Play nätverks-bred inkluderingsprocess
  • Förbättrad självläkning och feltolerans med Explorer Frame funktion
  • Standardiserad metod för Over the Air firmware uppdateringar (OTA)
  • Förbättrad information för produkt certifierings databasen

För att vara säker på vad som är Z-Wave Plus certifierat så notera denna bild över produktbilderna på vår hemsida (Z-Wave Plus)

Kompatibilitetslistan uppdateras ganska ofta men fel kan förekomma. Hittar du något som är felaktigt så meddela oss gärna så att vi kan ändra!

Controller Status Kommentar
ZNet Lite V2 Enheten fungerar helt och hållet
Home Center HC3 Enheten fungerar inte helt och hållet
Homey Enheten fungerar helt och hållet
Zipabox Enheten fungerar helt och hållet