Popp

Wall_C Forever - Wallcontroller

Artikelnummer: POPE123726
Utgått ur sortimentet

With this battery wall controller you can control your smart home from everywhere in the room, because the flat switch can be positioned on and removed from every planar surface without laying or pay attention cables. Using the wall controller is as simple as using an ordinary light switch – but with significantly more functions.

The device could be used as primary controller and secondary controller as well. With the buttons 3 and 4 new Z-Wave devices can be added to the wireless wall controller. Equally you can remove devices from your Z-Wave network.

Due to primary controller function you can use the battery wall controller as standalone remote control as well without using any smart home gateway. Devices such as sockets, window blinds, dimmer, lights and electronic door locks can be switched by the controller directly.

Once one device is added to the wall controller it checks the device type (switch, dimmer,…) and assigns the buttons with correct commands.

Of course you can also include the battery wall controller to an existing Z-Wave smart home network. Therewith you have the possibility to trigger defined scenes such as the closing of the shutters with simultaneous switching on all lights in the room by only one touch of a button. Or place the wall controller next to your entrance door and start the scenario “All off” when you’re leaving home to switch off al lights and electrical devices you don’t need during absence with only one touch of a button. 

Features:

  • Frame and rocker switch in FOREVER design
  • Use as simple as an ordinary light switch – but much more versatile
  • Supports Security/secure commands
  • Four buttons can be assigned free (as single buttons or button pairs)
  • Longer battery life due to optimized energy management

Skriv en recension

Vad är Z-Wave Plus?

Z-Wave Plus™ är en certifiering som är utvecklad för att hjälpa användare att identifiera produkter som använder den "nya generationen" även känd som "500 serien" av Z-Wave hårdvara. Z-Wave Plus™ erbjuder en drös med olika extra funktioner och möjligheter som förbättrar ditt användande och gör att installationen av Z-Wave enheter blir enklare.

Z-Wave har varit ledande på marknaden inom driftskompatibla smarta enheter för hemmet sedan 2004. Med introduktionen av Next-Gen (Z-Wave 500 serien) hårdvaran så såg Z-Wave nya möjligheter, inkluderat med längre räckvidd, längre batteritid, Over The Air uppgradering (OTA), fler RF kanaler och mycket mer. Allt detta och dom är bakåtkompatibla med existerande Z-Wave enheter.

För konsumenter, husägare, integratörer och tjänsteleverantörer så blev denna uppgradering väldigt fördelsfull i termerna av mycket enklare installation, rikare enhetsprofiler, förbättrad självläkning och längre batteritid.

Egenskaper:

  • 50% Längre batteritid
  • 67% Längre räckvidd
  • 250% Mer bandbredd
  • 3 F kanaler för förbättrad störningsskydd och högre bandbredd
  • Ny Plug-n-Play nätverks-bred inkluderingsprocess
  • Förbättrad självläkning och feltolerans med Explorer Frame funktion
  • Standardiserad metod för Over the Air firmware uppdateringar (OTA)
  • Förbättrad information för produkt certifierings databasen

För att vara säker på vad som är Z-Wave Plus certifierat så notera denna bild över produktbilderna på vår hemsida (Z-Wave Plus)