POPP Flow Stop 2

Artikelnummer: POPE701479
Utgått ur sortimentet

Manual

Ersättare
Aqua-Scope Z-Wave Flow stop / vattenavstängare

The 2nd generation of POPP Flow Stop comes with an improved design of the fixture. It replaces the 1st Gen POPP Flow Stop (POPE009501) and gives a better stability than the first generation.

Overflowing bathtubs, leaking washing machines or defects to gas and water pipelines – damages can occur almost anywhere and cause immense costs. The POPP Flow Stop 2 can prevent this – thanks to Z-Wave.

Flow Stop is a motor operated shut-off controller for automatic flow stop of gas and water pipes. It's equipped with Z-Wave technology. This means it's particularly suitable for use in smart homes.

Even installation is easy. The POPP Flow Stop 2 is delivered completely including valve control/motor, power supply, mounting and Quick Start Guide. It's easy to assembly on an existing ball stop valve. In doing so, all usual pipe standards, including ½" and ¾", are possible. On this occasion, no pipes must be dismantled or even water must be drained. That way the installation is normally done in 5 to 10 minutes.

As of now, you can turn off the water also from outside via mobile device – or automatically, e.g. if a water sensor detects a leaking pipeline. It doesn’t matter if you install the Flow Stop on your washing machine’s water conduit or use it for garden irrigation – the POPP Flow Stop 2 will make your home safer and more comfortable.

Only the POPP Flow Stop 2 supports the Security Command Class and owns security features which aren't supported by comparable devices.

Communication to the Flow Stop 2 is secured with encryption. This doesn't only protect the device against burglars that want to do harm to the home (e.g. waste water by opening the valve to watering system). It’s also protecting better against jamming of the communication link.
Configuration of the local LED: The user can decide if the blue LED shall indicate open or close state.
Unsolicited report of any state change of the Flow Stop to the controller.
Second communication channel to report manual operation of the device. Here up to 5 other devices can be operated independent of the controller.
The remote operation of the device can be limited to ‘only open’, ‘only close’ or ‘no remote control’ to protect against malfunction.

Features:

Shut-off controller for automatic gas and water pipe flow regulation
Easy installation on a ball valve (water doesn’t have to be drained)
For all usual pipe standards, including ½" and ¾"
Supports secure communication (Security Command Class)
Wireless Technology: Z-Wave Plus
IP class: IP64

Vad är Z-Wave Plus?

Z-Wave Plus™ är en certifiering som är utvecklad för att hjälpa användare att identifiera produkter som använder den "nya generationen" även känd som "500 serien" av Z-Wave hårdvara. Z-Wave Plus™ erbjuder en drös med olika extra funktioner och möjligheter som förbättrar ditt användande och gör att installationen av Z-Wave enheter blir enklare.

Z-Wave har varit ledande på marknaden inom driftskompatibla smarta enheter för hemmet sedan 2004. Med introduktionen av Next-Gen (Z-Wave 500 serien) hårdvaran så såg Z-Wave nya möjligheter, inkluderat med längre räckvidd, längre batteritid, Over The Air uppgradering (OTA), fler RF kanaler och mycket mer. Allt detta och dom är bakåtkompatibla med existerande Z-Wave enheter.

För konsumenter, husägare, integratörer och tjänsteleverantörer så blev denna uppgradering väldigt fördelsfull i termerna av mycket enklare installation, rikare enhetsprofiler, förbättrad självläkning och längre batteritid.

Egenskaper: