Everspring

Z-Wave Motion Detector

Artikelnummer: EVR_SP103
Utgått ur sortimentet

Ersättare
Everspring Motion Detector for indoor and outdoor use

This motion detector (PIR = passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device. It needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is required.The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered.

Skriv en recension

Kompatibilitetslistan uppdateras ganska ofta men fel kan förekomma. Hittar du något som är felaktigt så meddela oss gärna så att vi kan ändra!

Controller Status Kommentar
ZNet Lite V2 Enheten fungerar helt och hållet
RaZberry Enheten fungerar helt och hållet
Home Center HC3 Enheten fungerar helt och hållet i HC2 och HCL
Zipabox Enheten fungerar helt och hållet