Shelly Qubino Z-Wave 2PM Relay 16A 2 channel

Article no.: Shelly_W_2PM
Availability: 17st

The Shelly Z-Wave 2PM Relay 16A 2 channel turns ordinary two-pole wall switch into a smart switch. It enables remote control of two electrical devices, such as lights, ceiling fans, IR panels, and R heaters. It switches (on/off) two independent loads and measures their power... read more

399 kr

Add to Wish List

The Shelly Z-Wave 2PM Relay 16A 2 channel turns ordinary two-pole wall switch into a smart switch. It enables remote control of two electrical devices, such as lights, ceiling fans, IR panels, and R heaters.

It switches (on/off) two independent loads and measures their power consumption separately and in total. Connected devices can be controlled either via smartphone or tablet, according to schedules or scenes, etc. It is compatible with switches or push buttons.

A gateway (smart hub) is required for the configuration of the device.

Features:

Relay Z-Wave 2x 10A (16A total)
Measures power consumption of the connected device on each channel
Small size ensures the simplest installation behind every wall switch or wall socket
Extended wireless range: Up to 40m indoors
SmartStart for the automatic set-up.
OTA Firmwareupdate for over-the-air updates
S2 Security authenticated
Extremely low energy consumption: Less than 0.3W
Power supply: 110-240 V AC / 24 V DC +/-10%
Max. switching current AC: 10 A per channel, 16 A total, 18 A total peak
Max. switching voltage DC: 30 V
Max. switching current DC: 10 A
Overheating protection: Yes
Overload protection: Yes
Z-Wave S800
Ambient temperature: -20°C to 40°C
Humidity: 30% to 70% RH
Max. altitude: 2000 m

What is Z-Wave Plus?

Z-Wave Plus™ is a certification developed to help users identify products that use the "new generation" also known as the "500 series" of Z-Wave hardware. Z-Wave Plus™ offers a bunch of extra functions and possibilities that improve your use and make the installation of Z-Wave devices easier.

Z-Wave has been the market leader in interoperable smart home devices since 2004. With the introduction of Next-Gen (Z-Wave 500 series) hardware, Z-Wave saw new opportunities, including longer range, longer battery life, Over The Air upgrade (OTA), more RF channels and much more. All this and they are backwards compatible with existing Z-Wave devices.

For consumers, home owners, integrators and service providers, this upgrade turned out to be very beneficial in terms of much easier installation, richer device profiles, improved self-healing and longer battery life.

Features:

50% Longer battery life
67% Longer range
250% More Bandwidth
3 F channels for improved interference protection and higher bandwidth
New Plug-n-Play network-wide inclusion process
Improved self-healing and fault tolerance with Explorer Frame function
Standardized method for Over the Air firmware updates (OTA)
Improved information for the product certification database

To be sure what is Z-Wave Plus certified, note this image above the product images on our website ()

What is Z-Wave S2?

Z-Wave S2 is the latest generation of Z-Wave developed to reduce power consumption, faster commands between devices and increase security on the network.

Advanced encryption

S2 improves Z-Wave Plus and Gen5 devices with an extra layer of AES 128-bit encryption of wireless signals combined with security class UL 1023.

Increased security

The first two layers of security are joined by a third - Always-on ECDH key exchange, which makes man-in-the-middle or brute force hacking almost impossible.

Better battery life

ECDH and AES 128-bit reduce Z-Wave Plus wireless data transmission, security communication now uses 66% less battery.

Faster commands

Your smart home becomes seamless. S2 devices improve Z-Wave wireless performance speed by more than 50%, reducing latency down to milliseconds.

To be sure what is Z-Wave S2 certified, note this image above the product images on our website ( Z-Wave Plus )