Poynting

Poynting Rundstrålande 5G LTE 4x4 MIMO 617-3800MHz

Article no.: A-OMNI-0214-V1-01
Availability: 1pcs - Hurry up
The Poynting OMNI-214 is a broadband antenna that covers all modern LTE/5G frequencies with balanced gain from 617 to 3800 MHz. The antenna offers 4×4 MIMO capability from its vertically separated elements, all in the same package. The antenna design enables superior pattern con... read more
2,969 kr

The Poynting OMNI-214 is a broadband antenna that covers all modern LTE/5G frequencies with balanced gain from 617 to 3800 MHz.

The antenna offers 4×4 MIMO capability from its vertically separated elements, all in the same package.

The antenna design enables superior pattern control across the entire frequency range, making the OMNI-214 a true omnidirectional 4×4 MIMO antenna, suitable for urban or commercial applications.

The OMNI-214 guarantees reception almost everywhere and is usable in all parts of the world.

The performance makes the antenna future-proof, as it covers the LTE Band 71 (617 to 698 MHz) as well as the CBRS bands from 3400 to 3800 MHz.

The antenna has protection class IP65 against dust and water for use in tougher environments.

  • Ultra-broadband omnidirectional antenna
  • 4x4 MIMO capability for better performance

    li>

  • Covers contemporary LTE/5G bands from 617 to 3800 MHz
  • Robust, dust and weatherproof housing (IP65)

Product sheet PDF (English)

Read more about 4G/LTE bands and all frequencies

Read more about the UMTS/3G bands with frequencies

Read more about Swedish operators' bands, frequencies and common networks

< /tr> < tr>
Frequency band 617-960 MHz
1427-1517 MHz
1710-2700 MHz
3400-3800 MHz
Gain Max 4 dBi
0 dBi on 617-960 MHz
2 dBi on 1427-1517 MHz
4 dBi on 1710-2700 MHz
3.5 dBi on 3400-3800 MHz
Impedance 50 Ohm
Mounting 1 inch-14NF female thread for marine mount.
Mast Mount
Location Indoors or outdoors
Max output power 10W
Antenna cord 4 pcs 2 meters HDF 195 Super Low Loss
Cable connection 4 pcs SMA male
Size 646 x 71 mm
Weight 795 grams
IP Rating IP65
Temperature -40 to +80 degrees
Wind resistance 160 km/h

Write a review

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G

Frequency band Net1 Tele2 Telia Telenor Tre
450MHz (Band 31)
800MHz (Band 20)
900MHz (Band 8)
1800MHz (Band 3)
2600MHz (Band 38)