Milesight UR75 5G WiFi v3

Article no.: UR75-504AE-W2
Delivery time: Unconfirmed

Milesight UR75 v3 is an industrial 5G router with 5 Gigabit Ethernet and a fast WiFi 6/802.11ax with hardware-accelerated dual band WIFI. Even if you don't have 5G coverage on site today, the UR75 has one of the fastest 4G modules you can get with up to 4 times the performance... read more

8 195 kr

button_wishlist

Milesight UR75 v3 is an industrial 5G router with 5 Gigabit Ethernet and a fast WiFi 6/802.11ax with hardware-accelerated dual band WIFI.

Even if you don't have 5G coverage on site today, the UR75 has one of the fastest 4G modules you can get with up to 4 times the performance in the uplink compared to a regular LTE CAT4/6 router and up to Gigabit performance in downlink on 4G.

On 5G, the radio module can provide a maximum of 4.67 Gbit/s in downlink and 2.5 Gbit/s in Uplink. ATTENTION! Theoretical values under optimal conditions.

Just like all industrial routers, it has hardware and software watchdogs to always keep the router and connection up in all conditions.

Industry or Business
The UR75 is designed for an industrial environment with strict requirements for operational reliability, but is also excellent as a router for a company that wants a more operationally reliable 5G router than what ordinary consumer products can offer.

5 x Gigabit Ethernet
The UR75 has five Ethernet connectors configured as 4 x LAN + 1 x WAN.

WiFi 6/802.11ax
The router has a fast Dual band WiFi 6/802.11ax. It also supports WiFi as WAN.

VPN
UR75 supports several different VPN technologies such as IPSec, OpenVPN (Server or Client), PPTP (Client), L2TP, GRE and DMVPN

Fail over / Redunsdans
The UR75 has a fast 5G radio, but can also be connected to another internet connection via Ethernet. In addition, (one or both) WiFi modules can be used to connect the router to another WiFi access point. The router can prioritize the cheapest/best connection and send traffic as needed.

Faster transfer
A 2 GHz Quad-core ARM Cortex-A55 processor with 1 GB Flash and 1 GB RAM means that there is good capacity.

The UR75 has a built-in card slot for an M.2 NVMe SSD if you need more space for applications/data.

Other connections
As I said, the UR75 is created for industrial applications and therefore they have the possibility to connect RS232/RS485 as well as a digital IN port and a digital OUT. RS232/RS485 can be connected as serial port server or Client. Or Modbus Slave/Master or Modbus gateway.

The IN port can e.g. can be used to trigger alarms via SMS, SNMP or email.

Routing
UR75 has advanced support for various routing protocols such as RIP, OSPF, Routing filtering as well as the possibility of static routing tables.. As well as support for VRRP for those who want a complete hardware redundant Fail over solution.

Event Reporting
The router has a built-in report engine that can send E-mail, SMS and/or SNMP Traps when something happens. You can choose which type of event will trigger which action.

Cloud Management
Milesight Device Management is available as an accessory. Either your own server (Linux/Ubuntu-based) or if you prefer to use Milesigth's cloud server. Both are free for up to 25 devices. Email info@communica.se if you want a cloud account.

Cloud VPN
Milesight VPN (DMVPN server) is available as an accessory for those who want a central VPN concentrator (own server, Linux/Ubuntu-based). Free for up to 25 devices.

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G