ZyXEL LTE3301 2G/3G/4G router

Article no.: LTE3301
Delivery time: Unconfirmed

2G/3G/4G router from ZyXEL ZyXEL's routers for home use make it possible to enjoy multiple multimedia applications at the same time - whether you want to stream HD video in real time, play games or surf the web.< /p> With their user-friendly design and energy-saving features, ZyX... read more

1,890 kr

Add to Wish List

2G/3G/4G router from ZyXEL

ZyXEL's routers for home use make it possible to enjoy multiple multimedia applications at the same time - whether you want to stream HD video in real time, play games or surf the web.< /p>

With their user-friendly design and energy-saving features, ZyXEL's routers make it easy to connect to the network and run multiple multimedia applications in parallel, while keeping energy consumption down.

Typ av enhet	Trådlös router - trådlöst mobilmodem - 4-ports-switch (inbyggd)
Modell	Skrivbordsmodell
Cellulärt protokoll	GSM, UMTS, LTE
Datalänkprotokoll	Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Frekvensband	2.4 GHz
Dataöverföringshastighet	300 Mbps
Kapacitet	NAT-sessioner : 4096
Nätverks/transportprotokoll	PPTP, L2TP, IPSec
Protokoll för administration på distans	HTTP, TR-069
Funktioner	Brandväggsskydd, NAT-stöd, VLAN-stöd, MAC-adressfiltrering, stöd för IPv6, VPN passthrough, fast programvara kan uppdateras, Quality of Service (QoS), Wi-Fi Protected Setup (WPS), DHCP-server, trådlöst bryggläge, återställningsknapp, IPv4-support, DHCP-relä, DHCP-klient
Standarder som följs	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Strömtillförsel	AC 120/230 V
Dimensioner (BxDxH)	18.6 cm x 12 cm x 3 cm
Vikt	350 g

Typ av enhet	Trådlös router - trådlöst mobilmodem - 4-ports-switch (inbyggd)
Modell	Skrivbordsmodell
Cellulärt protokoll	GSM, UMTS, LTE
Datalänkprotokoll	Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Frekvensband	2.4 GHz
Dataöverföringshastighet	300 Mbps
Kapacitet	NAT-sessioner : 4096
Nätverks/transportprotokoll	PPTP, L2TP, IPSec
Protokoll för administration på distans	HTTP, TR-069
Funktioner	Brandväggsskydd, NAT-stöd, VLAN-stöd, MAC-adressfiltrering, stöd för IPv6, VPN passthrough, fast programvara kan uppdateras, Quality of Service (QoS), Wi-Fi Protected Setup (WPS), DHCP-server, trådlöst bryggläge, återställningsknapp, IPv4-support, DHCP-relä, DHCP-klient
Standarder som följs	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Strömtillförsel	AC 120/230 V
Dimensioner (BxDxH)	18.6 cm x 12 cm x 3 cm
Vikt	350 g

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G