Ubiquiti NanoStation Loco M5 - 5GHz

Article no.: UBI-LOCOM5
Availability: 28st

Data sheet

WiFi beyond the ordinary - a truly professional access point on the 5ghz band Built to sit indoors or outdoors, for example on a roof to cover a larger area. Powered with the network cable (adapter for PoE is included). Can be used to provide really good wifi coverage to the... read more

990 kr

button_wishlist

WiFi beyond the ordinary - a truly professional access point on the 5ghz band

Built to sit indoors or outdoors, for example on a roof to cover a larger area.
Powered with the network cable (adapter for PoE is included).
Can be used to provide really good wifi coverage to the home/office, as a high performance wifi link or other wireless applications.

NanoStation Loco M5 has 1st RJ45 connector for connection to your LAN and 8dBi antenna gain.

Can be used to bridge two networks over WiFi, or as a stand-alone access point with good range.

Teknisk Specifikation
Anslutningsteknik	Trådlös
Antenn	Inbyggd
Bredd	8 cm
Datalänkprotokoll	AirMax
Djup	3.1 cm
Energiförbrukning vid drift	5.5 Watt
Flash-minne	8 MB
Formfaktor	Extern
Frekvensband	5 GHz
Funktioner	Quality of Service (QoS), pålmonterbar
Förstärkningsnivå	13 dBi
Gränssnitt	1 x 100Base-TX (PoE) - RJ-45
Höjd	16.3 cm
Inkluderade tillbehör	PoE-injektor, pålmontering
Installerade processorer	1 x Atheros MIPS 24KC 400 MHz
Luftfuktighet vid drift	5 - 95%
Max antal som stöds	1
Max temperatur vid drift	75 °C
Medföljande OS	AirOS
Min temperatur vid drift	-30 °C
RAM	32 MB SDRAM
Standarder som följs	FCC Part 15.247, RSS-210, IC, RoHS
Standarder som följs	IEEE 802.3af
Stöd för PoE (Power Over Ethernet)	PoE
Typ av enhet	Trådlös brygga
Vikt	180 g

Teknisk Specifikation
Anslutningsteknik	Trådlös
Antenn	Inbyggd
Bredd	8 cm
Datalänkprotokoll	AirMax
Djup	3.1 cm
Energiförbrukning vid drift	5.5 Watt
Flash-minne	8 MB
Formfaktor	Extern
Frekvensband	5 GHz
Funktioner	Quality of Service (QoS), pålmonterbar
Förstärkningsnivå	13 dBi
Gränssnitt	1 x 100Base-TX (PoE) - RJ-45
Höjd	16.3 cm
Inkluderade tillbehör	PoE-injektor, pålmontering
Installerade processorer	1 x Atheros MIPS 24KC 400 MHz
Luftfuktighet vid drift	5 - 95%
Max antal som stöds	1
Max temperatur vid drift	75 °C
Medföljande OS	AirOS
Min temperatur vid drift	-30 °C
RAM	32 MB SDRAM
Standarder som följs	FCC Part 15.247, RSS-210, IC, RoHS
Standarder som följs	IEEE 802.3af
Stöd för PoE (Power Over Ethernet)	PoE
Typ av enhet	Trådlös brygga
Vikt	180 g

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G