Ready-connected H-CAN kit - Nissan

Article no.: H-CAN-KIT-NISSAN
Availability: 10st

Speed limit your Nissan D40 in a snap with the fully wired H-CAN kit! Simple as 1,2,3,4: Connect the gas pedal switch and seal with a wire seal Solder in/power steal CAN bus The double fuse must have ignition current from the car's fuse box. Attach the box Done!... read more

4 990 kr

Available Options

Certificate * - Write chassis number In the event of an inspection, you need a certificate from us. In order for us to be able to issue this certificate, we must have the registration number of the car.

Cable set for the car's gas pedal *

Message

button_wishlist

Speed limit your Nissan D40 in a snap with the fully wired H-CAN kit!
Simple as 1,2,3,4:

Connect the gas pedal switch and seal with a wire seal
Solder in/power steal CAN bus
The double fuse must have ignition current from the car's fuse box.
Attach the box

Done!

Look up is what your gas pedal connector looks like and choose the correct cable from the list. We then build your H-CAN kit to order.
Fill in your registration number to receive a certificate for the registration inspection.

This pre-wired H-CAN kit includes:

Pre-configured H-CAN for your car model set to 30km/h (double check against GPS)
Accelerator switch
Cables pulled in hose
Mounting box
Double fuse to power the H-CAN from the car's fuse box.
3 wire seals, one for the accelerator cable and two for the mounting box.

Note! Do not pull the cable seals through the box. The inspection must normally do this.

Connection CAN-BUS, See here.

Instructions for H-CAN, See here.

Instructions for our ready-made cabling, See here.

Building descriptions, See here.

Power source, See here.