- Your shopping cart is empty!
Poynting XPOL 5G LTE MIMO 11dBi 698-3800 MHz *** DEMO ***
Discontinued
Replacement
Poynting XPOL 5G LTE MIMO 11dBi 698-3800 MHz
Broken packaging, tested and working like new!
The sequel to the wildly popular XPOL-A0002 is finally here! This antenna has better amplification on existing 3G/4G bands and supports upcoming 5G frequencies.
Poynting XPOL-2-5G is the third generation of this very popular directional antenna for both 4G and 5G. Better amplification on the 4G bands and support for the new 5G bands.
The antenna has a completely new interior based on Artificial Magnetic Conductors (AMC) and a completely new type of antenna radiator. This provides higher and more even amplification across all bands as well as a better and more efficient directional action. In addition, the new AMC technology and the new antenna radiator provide higher efficiency and lower losses (lower VSWR value) than previous antennas.
It provides 2-3dB better gain over all bands compared to regular XPOL-2-V2.
The XPOL-2-5G antenna includes the new 3400-3800 MHz bands and is suitable for 2G/3G/4G and 5G.
The antenna is 2x2 MIMO with cross-polarized elements. 5 meter twin cable is firmly mounted in the antenna.
- 2-3dB higher gain over all bands compared to previous version
- New 3400MHz-3800MHz, 5G band with 11dBi gain
- Consistent broadband performance
- Cross-polarized 2x2 MIMO antenna
- Mounting on wall or pole
- Light and robust
- Weatherproof and waterproof (IP65)
Frekvensband | 698-960 MHz 1710-2700 MHz 3400-3800 MHz |
Förstärkning | Max 11 dBi 9 dBi, 698-960 MHz 10 dBi, 1710-2700 MHz 11 dBi, 3400-3800 MHz |
Impedans | 50 Ohm |
Polarisation | ±45° |
Fäste | Mastfäste. Kan även placeras på vägg (se tillbehör). |
Placering | Utom-/Inomhus |
Max uteffekt | 20W |
Antennsladd | 2 st 5 meter HDF-195 Super Low Loss |
Kabelanslutning | 2 st SMA-hane |
Storlek | 255 x 255 x 80 mm |
Vikt | 1,55 kg |
Vindtålighet | |
Temperatur | -40°C till +80°C |
IP-klassning | IP65 |
Frekvensband | 698-960 MHz 1710-2700 MHz 3400-3800 MHz |
Förstärkning | Max 11 dBi 9 dBi, 698-960 MHz 10 dBi, 1710-2700 MHz 11 dBi, 3400-3800 MHz |
Impedans | 50 Ohm |
Polarisation | ±45° |
Fäste | Mastfäste. Kan även placeras på vägg (se tillbehör). |
Placering | Utom-/Inomhus |
Max uteffekt | 20W |
Antennsladd | 2 st 5 meter HDF-195 Super Low Loss |
Kabelanslutning | 2 st SMA-hane |
Storlek | 255 x 255 x 80 mm |
Vikt | 1,55 kg |
Vindtålighet | |
Temperatur | -40°C till +80°C |
IP-klassning | IP65 |
What is Z-Wave Plus?
Z-Wave Plus™ is a certification developed to help users identify products that use the "new generation" also known as the "500 series" of Z-Wave hardware. Z-Wave Plus™ offers a bunch of extra functions and possibilities that improve your use and make the installation of Z-Wave devices easier.
Z-Wave has been the market leader in interoperable smart home devices since 2004. With the introduction of Next-Gen (Z-Wave 500 series) hardware, Z-Wave saw new opportunities, including longer range, longer battery life, Over The Air upgrade (OTA), more RF channels and much more. All this and they are backwards compatible with existing Z-Wave devices.
For consumers, home owners, integrators and service providers, this upgrade turned out to be very beneficial in terms of much easier installation, richer device profiles, improved self-healing and longer battery life.
Features:
- 50% Longer battery life
- 67% Longer range
- 250% More Bandwidth
- 3 F channels for improved interference protection and higher bandwidth
- New Plug-n-Play network-wide inclusion process
- Improved self-healing and fault tolerance with Explorer Frame function
- Standardized method for Over the Air firmware updates (OTA)
- Improved information for the product certification database
To be sure what is Z-Wave Plus certified, note this image above the product images on our website ()
What is Z-Wave S2?
Z-Wave S2 is the latest generation of Z-Wave developed to reduce power consumption, faster commands between devices and increase security on the network.
Advanced encryption
S2 improves Z-Wave Plus and Gen5 devices with an extra layer of AES 128-bit encryption of wireless signals combined with security class UL 1023.
Increased security
The first two layers of security are joined by a third - Always-on ECDH key exchange, which makes man-in-the-middle or brute force hacking almost impossible.
Better battery life
ECDH and AES 128-bit reduce Z-Wave Plus wireless data transmission, security communication now uses 66% less battery.
Faster commands
Your smart home becomes seamless. S2 devices improve Z-Wave wireless performance speed by more than 50%, reducing latency down to milliseconds.
To be sure what is Z-Wave S2 certified, note this image above the product images on our website ()
Explanation of frequency bands
When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.
A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.
450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.
800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.
900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.
1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).
2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.
Frekvensplan 4G
Frequency band | Net1 | Tele2 | Telia | Telenor | Tre |
---|---|---|---|---|---|
450MHz (Band 31) | |||||
800MHz (Band 20) | |||||
900MHz (Band 8) | |||||
1800MHz (Band 3) | |||||
2600MHz (Band 38) |
Kompatibilitetslistan uppdateras ganska ofta men fel kan förekomma. Hittar du något som är felaktigt så meddela oss gärna så att vi kan ändra!
Controller | Status | Kommentar |
---|---|---|
Aeotec Smart Home Hub | Enheten fungerar helt och hållet | |
ZNet Lite V2 | Enheten fungerar helt och hållet | |
Home Center HC3 | Enheten fungerar helt och hållet i HC2 och HCL | |
Homey | Enheten fungerar helt och hållet | |
Zipabox | Enheten fungerar helt och hållet |