Poynting XPOL MIMO 9dBi 650-2700 Mhz antenna

Article no.: XPOL-A0002
Discontinued

Replacement
Poynting XPOL 5G LTE MIMO 11dBi 698-3800 MHz

Poynting XPOL 9dBi MiMo directional antenna for 4G/3G/GSM

NOTE! Don't miss the new XPOL 11dBi, better amplification on 3G/4G and support for upcoming 5G frequencies. Click here for more information.

One of the special advantages of this antenna is that it is a directional antenna that works with all conceivable frequency bands for 4G, 3G and GSM, which means that you don't need to find out which 4G frequency bands apply to your area. This is specially designed for 4G routers and 4G USB sticks with dual antenna sockets.

The antenna comes with dual antenna cables, the connector fits popular 4G routers such as Huawei B715, B525, B618 (with 2 adapters 5170), B593s, E5186s, D-Link DWR-923 or ZTE MF28G. If you use a USB modem, you need an adapter. Feel free to read our blog post which shows the difference it can add an external antenna to your router.

No adapter is needed for e.g. Huawei B715, B525, B315, B593s, E5186s, D-Link DWR-923, DWR-921 or ZTE MF28G.
This adapter fits e.g. Huawei B618, E392, E398 and ZTE MF821D.
This adapter fits e.g. Huawei E3276, E3272, E3372

Something as unique as a small and compact directional antenna with good amplification on all 4G, 3G and GSM bands

The antenna has dual built-in cross-polarized (one antenna element vertical + one antenna element horizontal) antennas for maximum speed on the 4G networks. Two 5 meter Super Low Loss antenna cables with SMA male connectors run from the antenna.
The antenna is DC shorted to minimize the risk of damage to the router or USB stick in the event of thunder/lightning. The DC short circuit also means that it is automatically detected by routers such as Huawei E5186s.

This model has taken a long time for Poynting to develop. Making a compact Singleband antenna is not complicated. But combining good amplification with many frequency bands and also making it small and compact is engineering at the higher school.

Size 260 x 260 x 80 mm.
2 pcs 5m cables are on the antenna.
For suitable extension cables, see this page.
< /ul>
This is a very high quality antenna. It is made for long-term outdoor use, but can of course be installed indoors. The shell is made of very stable UV stabilized ABS plastic. The antenna is properly sealed with rubber gaskets to minimize the risk of water ingress.

Best in test - according to Computer Sweden
The antenna has been tested with very good results by Computer Sweden, < a href="https://file.lohelectronics.se/repository/Kommunikation/loh_poynting_cs_test.pdf" target="_blank">click here to download the article. The antenna once again proves to be a really good alternative and fully comparable to larger directional antennas. The picture below is an excerpt from Computer Sweden's test of, among other things, this antenna.

If you are the least bit unsure about Poynting's high quality and good effect, search for all customer reviews on Poynting's large directional antenna LPDA- A0092.

< strong>Find the right base station to target
It is easiest to call technical support to request an address or direction to the nearest base station. It is then important to also know whether it is a 3G or 4G base station you are getting direction to.

For best effect, this antenna should be mounted on mast pipes on the roof. The antenna can be wall-mounted, but keep in mind that it is important to have as clear a view as possible to the base station. The higher the frequencies the base station runs on, the more the signals are stopped by walls, forest etc.

Product sheet

Teknisk Specifikation
Frekvensband	698-960 MHz 1710-2170 MHz 2300-2400 MHz 2500-2700 MHz
Förstärkning	Max 9 dBi 8 dBi, 698-960 MHz 6,5 dBi, 1710-2170 MHz 7 dBi, 2300-2400 MHz 9 dBi, 2500-2700 MHz
Impedans	50 Ohm
Fäste	Mastfäste. Kan även placeras på vägg (se tillbehör).
Placering	Utom-/Inomhus
Max uteffekt	10W
Antennsladd	2 st 5 meter HDF 195 Super Low Loss
Kabelanslutning	2 st SMA-hane
Storlek	25,5 x 25 x 8 cm
Vikt	1,55 kg
Vindtålighet	<120km/h
Temperatur	-40°C till +70°C
IP-klassning	IP65

Teknisk Specifikation
Frekvensband	698-960 MHz 1710-2170 MHz 2300-2400 MHz 2500-2700 MHz
Förstärkning	Max 9 dBi 8 dBi, 698-960 MHz 6,5 dBi, 1710-2170 MHz 7 dBi, 2300-2400 MHz 9 dBi, 2500-2700 MHz
Impedans	50 Ohm
Fäste	Mastfäste. Kan även placeras på vägg (se tillbehör).
Placering	Utom-/Inomhus
Max uteffekt	10W
Antennsladd	2 st 5 meter HDF 195 Super Low Loss
Kabelanslutning	2 st SMA-hane
Storlek	25,5 x 25 x 8 cm
Vikt	1,55 kg
Vindtålighet	<120km/h
Temperatur	-40°C till +70°C
IP-klassning	IP65

Explanation of frequency bands

When choosing an antenna, pay attention to which frequency bands the antenna supports. Depending on which operator and where the antenna will be used, the frequency bands vary. Larger cities use 2600MHz while smaller towns use 800/900MHz with some support bands in between such as 1800/2100MHz.

A higher frequency band gives a higher speed but also has a shorter range. The same applies to the antenna, if you have a base station that transmits on 2600MHz, your antenna, antenna cable and the location of the antenna become more important than on a lower frequency band. Explanation of signal loss we will go through soon. Higher frequency bands also mean shorter range from the base station.

450MHz (coverage band) also known as the Net1 band is the frequency band that covers the most area in Sweden. Therefore, Net1 is known to be able to have reception where other operators don´t have a chance, but with low download and upload speeds. The reason why this band is called Net1 is because that the company Net1 has exclusive rights to this frequency band.

800MHz (coverage band) is used by all common operators, excluding Net1. The low frequency band means that 800MHz covers a lot of space. Therefore, the band is used outside big cities or smaller towns. 800MHz is the most used frequency band around Europe.

900MHz (coverage band) is the band that Tele2 and Telenor initially used as coverage band. 900MHz is a more unusual LTE band and in the beginning the band caused some problems when the clients (mobile phones etc.) could not connect to 900MHz. Today, the mobile phone manufacturers have adapted the mobile phones to be able to communicate on 900MHz.

1800MHz (capacity band) is the latest frequency band launched. All operators today use this band in metropolitan centers (apart from Net1).

2600MHz (capacity band) is a very well-used frequency band all over Europe. 2600MHz is the highest frequency band used for LTE, this means that the band also has the shortest range compared to 800/900MHz. Due to the high capacity, the band is used in metropolitan environments where many base stations are required to cover as much surface as possible and have as high a capacity as possible.

Frekvensplan 4G